CHECK NEW ARRIVALS

DONT FORGET YOUR FIN SAVERS

CHECK OUT OUR 3 FOR $90 DEAL

EXPLORE MORE GIFT IDEAS

LOOKING FOR DURABILITY? CHECK OUT OUR PERFORMANCE BODYBOARD LEASHES

ONLY AS STOCKS LAST

Stealth Steve Mackenzie Bullet PP Bat Tail Bodyboard

Season 2021
Size Guide
Bodyboard Size Guide Pop Up

One for the Bat Tail lovers!

Once again, Stealth used Bullet’s refined and slightly modernized template. With a little bit of extra width compared to a lot of the Pro model board on the market, this board is a perfect all-rounder for all wave sizes & suitable for prone or drop knee riding. The wide-point sits right on the elbows, making it easy to spin on and perfect for driving off your bottom turns. Bullet used this shape when he won the infamous '97 Pipe contest, so it's guaranteed to work when the waves are pumping too.

Board Performance 

PP Surlyn bodyboard performance bar
Select Size:
Bodyboard Size Guide Pop Up
Select Colour:
Black Deck/ Black Slick
Green Deck/ Grey Slick
Ice Blue Deck/ Grey Slick
Grey Deck/ Red Slick
Red Deck/ Grey Slick
Black Deck/ White Slick
Select Plug Options:

  • Core - 1.9lb Polypro
    Stringer - 1 x Carbon Fibre
    Rails - 55/45 Double Rails with Top Chine Rail
    Channels - Transitional Hull
    Slick - Surlyn
    Deck - Wavecushion Air 8lb PE
    Tail - Bat Tail
    Additional Features - Mesh, CNC Shaped, XFL Armour and Nose Bulbs.
    Manufacturing Country - Indonesia

    Understanding this bodyboard's technology

    Kinetic Bodyboard information at Inverted Bodyboarding
    1.9lbKinetic PP(Indonesia)
    Lightweight fusion foam compressed at 1.9lb offering instant recoil, enhanced stiffness and compression strength. This foam is 100% waterproof and ideal in mild to warm temperatures.
    Carbon Fibre Stringer Bodyboard Inverted
    Carbon Fibre/ CFT Stringer
    Lightweight filament wound carbon composite rod offering rigidity and durability.

    55 45 Rail information at Inverted Bodyboarding
    55/45 Rails
    This rail setup leaves less of your rail in the water and offers the rider less contact with the water and therefore better drive and speed throughout all conditions.

    Transitional Hull
    Slotted channels are a slender and deeper channel design with less graduation. These channels offer optimum control in bigger and heavier waves. 
    Surlyn plastic bodyboarding information at INverted
    DuPont SurlynSlick
    Surlyn plastic is thin and durable making it the most popular top end slick. Surlyn plastic will bend and stretch before it creases or snaps. This is a must have for intermediate through to advanced riders.
    Wave core PE deck skin on a bodyboard
    Wavecushion 8lb NXLPE(Indo)Decking
    Wavecushion decking is a 8lb decking foam. Much like the PE core, the PE decking is soft and flexible. Unlike the PE core, PE decking is used on all top end boards as for the flex and softness which allows riders to create a foam memory. Despite being soft and flexible PE is still extraordinarily durable.
    Bat Tail Bodyboards Inverted Bodyboarding
    Bat Tail
    Bat tail bodyboards are less curved in their profile, have a much wider finish and employ a‘W’ looking tail. The overall idea of this concept is to provide more surface area to land on, more release through the tail shape, and more speed through the emphasised hull. These tails can be a lot harder to control however, as for the limited hull area.
    Mesh information at Inverted Bodyboarding
    Mesh
    Mesh is a diamond shaped wire like plastic that runs under the slick of a bodyboard. Mesh creates a durable reinforcement between the bodyboards slick and the core making it stiffer, stronger and less likely to crease.
    Nose bulb information at Inverted bodyboarding
    Nose Bulbs
    Nose bulbs are a slightly raised area of foam on the nose of the board which create a comfortable spot to grip the nose.
    CNC Shaping information at Inverted Bodyboarding
    CNC Shaping
    Short for“computernumerical control”, CNC machines allow shapers to cut boards perfectly to the mm. CNC machines offer the sharpest possible finish to bodyboard manufacturing.
    Indonesia bodyboard manufacturing information at Inverted Bodyboarding
    Manufacturing Country: Indonesia/ Broady
    The Broady bodyboard factory started in New Zealand in the 80’s but relocated to Indonesia in the early 2000’s. With two of the industries leading shapers at the helm, the Broady Factory uses CNC shaping, buzztech heat lamination and purpose built Aku Shaping in order to produce high performance bodyboards for most of the world’s leading brands.

Search