Science Tanner McDaniel Spec Tri Quad Bodyboard

Science Tanner McDaniel Spec Tri Quad Bodyboard

Season 2020/ 21

Size Guide

Bodyboard Size Guide

$349.95

The Science Tanner McDaniel Spec offers maximum speed through its Tri-Quad concave system. A sleek template built for speed, further complimented by its tri-quad.

Board Performance

Board Technology
Board Dimensions

Core - 1.9lb Polypro
Stringer - 1 x CFT Stringer
Rails - 55/45 Double Rails
Channels - Quad Vent
Slick - HD
Deck - Wavecushion Air 8lb PE
Tail - Tri-Crescent
Additional Features - CNC Shaped, XFL Armour and Nose Bulbs.
Manufacturing Country - Indonesia

Understanding this bodyboard's technology

	1.9lbKinetic PP(Indonesia) Lightweight fusion foam compressed at 1.9lb offering instant recoil, enhanced stiffness and compression strength. This foam is 100% waterproof and ideal in mild to warm temperatures.
	Carbon Fibre/ CFTStringer Lightweight filament wound carbon composite rod offering rigidity and durability.
	55/45 Rails This rail setup leaves less of your rail in the water and offers the rider less contact with the water and therefore better drive and speed throughout all conditions.
	QuadVent Channels The quad vent uses two outer channels in the space of one. The two outer channels redirect water flow in order to maximise speed in the power pockets of the wave. The central raised area allows the user to maximise drive.
	HDPE Slick HDPE is a high density plastic. This plastic is hard wearing and very stiff. Whilst it will perform as per the norm, it is more prone to creasing when under heavy stress as for its high density properties.
	Wavecushion 8lb NXLPE(Indo)Decking Wavecushion decking is a 8lb decking foam. Much like the PE core, the PE decking is soft and flexible. Unlike the PE core, PE decking is used on all top end boards as for the flex and softness which allows riders to create a foam memory. Despite being soft and flexible PE is still extraordinarily durable.
	Tri-Crescent The tri-crescent is a clipped crescent tail with small complimenting compressions were the tri-quad meets the tri-crescent. The tri-crescent works to further engage the tri-quad and maximise speed and control.
	Nose Bulbs Nose bulbs are a slightly raised area of foam on the nose of the board which create a comfortable spot to grip the nose.
	CNC Shaping Short for“computernumerical control”, CNC machines allow shapers to cut boards perfectly to the mm. CNC machines offer the sharpest possible finish to bodyboard manufacturing.
	Manufacturing Country: Indonesia/ Broady Bodyboards that come from Indonesia come out of Nick Mesritz’s factory. Nick Mesritz is the owner and shaper of both NMD and VS bodyboards and has more than 20 years experience in shaping, testing and creating wavecraft.