Core - 1.9lb Polypro Stringer - 1 x CFT Stringer Rails - 55/45 Double Rails with Vax Trax rails Channels - Zero Slot Hull Concave Slick - Surlyn Deck - Wavecushion Air 8lb PE Tail -Clipped Chisel Tail with Tail Piece Additional Features - Contour, Mesh, CNC Shaped, XFL Armour and Nose Bulbs. Manufacturing Country - Indonesia
Understanding this bodyboard's technology
Slot HullThe Slot Hull is a Stealth initiative which emphasises planing. The large single hull concave allows the rider to move across the wave with less traction and create higher levels of down the line speed.
Lightweight fusion foam compressed at 1.9lb offering instant recoil, enhanced stiffness and compression strength. This foam is 100% waterproof and ideal in mild to warm temperatures.
Carbon Fibre/ CFTStringer
Lightweight filament wound carbon composite rod offering rigidity and durability.
This rail setup leaves less of your rail in the water and offers the rider less contact with the water and therefore better drive and speed throughout all conditions.
Vax Trax Rails
Vax Trax is a Stealth initiative. These rails have a small inlet in the rail at the tail end of the board. The idea is to redirect waterflow in order to maintain control over the rail of your bodyboard.
The Slot Hull is a Stealth initiative which emphasises planing. The large single hull concave allows the rider to move across the wave with less traction and create higher levels of down the line speed.
Surlyn plastic is thin and durable making it the most popular top end slick. Surlyn plastic will bend and stretch before it creases or snaps. This is a must have for intermediate through to advanced riders.
Wavecushion 8lb NXLPE(Indo)Decking
Wavecushion decking is a 8lb decking foam. Much like the PE core, the PE decking is soft and flexible. Unlike the PE core, PE decking is used on all top end boards as for the flex and softness which allows riders to create a foam memory. Despite being soft and flexible PE is still extraordinarily durable.
The Chisel Tail allows the rider more grip to the wave through its straight profile. This cut emphasises the tails grab and works to hold the rider in place in waves of consequence.
The tail piece is a separate piece of decking that goes on the crescent tail. Done for aesthetic purposes only and as oppose to rolling the deck all the way down over the tail.
The contours are the slight indents in the deck of a bodyboard. Their job is to help you lock in to the board as best as possible.
Mesh is a diamond shaped wire like plastic that runs under the slick of a bodyboard. Mesh creates a durable reinforcement between the bodyboards slick and the core making it stiffer, stronger and less likely to crease.
Nose bulbs are a slightly raised area of foam on the nose of the board which create a comfortable spot to grip the nose.
Short for“computernumerical control”, CNC machines allow shapers to cut boards perfectly to the mm. CNC machines offer the sharpest possible finish to bodyboard manufacturing.
Manufacturing Country: Indonesia/ Broady
The Broady bodyboard factory started in New Zealand in the 80’s but relocated to Indonesia in the early 2000’s. With two of the industries leading shapers at the helm, the Broady Factory uses CNC shaping, buzztech heat lamination and purpose built Aku Shaping in order to produce high performance bodyboards for most of the world’s leading brands.