CHECK NEW ARRIVALS

DONT FORGET YOUR FIN SAVERS

CHECK OUT OUR 3 FOR $90 DEAL

BE SURE TO CHECK EACH BRAND SPECIFIC SIZE GUIDE

EXPLORE MORE GIFT IDEAS

LOOKING FOR DURABILITY? CHECK OUT OUR PERFORMANCE BODYBOARD LEASHES

ONLY AS STOCKS LAST

VS Dave Winchester Quantum PFST NRG+ WIFLY Quad Concave Bodyboard

Season 2020/ 21
Size Guide
Bodyboard Size Guide

 

 

Bodyboard Size guide at Inverted Bodyboarding

The VS Dave Winchester Quantum with the WiFly finish is the pinnacle of top end bodyboarding. This board works to catch and release water in order to maximise speed. The WiFly tail will catch, release and hold a rail with ease, built for performance bodyboarding. The NRG core will help you maintain control in colder climates.

Board Performance

NRG Quad Concave Parabolic bodyboard performance review
Select Size:
Bodyboard Size Guide

 

 

Bodyboard Size guide at Inverted Bodyboarding
Select Colour:
Black Deck/ Green Slick
Black Deck/ Grey Slick
Select Plug Options:

  • Core - Parallel Flex System (PFS-T) 1.6lb Polypro
    Stringer - 1 x CFT
    Rails - 55/45 Double Rails
    Channels - Trinity Concave
    Slick - Surlyn
    Deck - Wavecushion Air 8lb PE
    Tail - WiFly V2
    Additional Features - Winchester Line Contour, Plastic Imprint Logo MESH, CNC Shaped, XFL Armour and Nose Bulbs.
    Manufacturing Country - Indonesia

    Understanding this bodyboard's technology

    *Please note, WIFLY tail bodyboards should be rode 0.5" bigger than normal.

    PFST or Parabolic bodyboard information at Inverted Bodyboarding
    PFST
    Mid-weight Kinetic PP with straight mesh T90 beams built into the board. This creates elongated bodyboard channels and enhances rigidity in order to maximise projection, recoil and speed. This foam is 100% waterproof and ideal in warm climates.
    NRG Bodyboard foam information at Inverted Bodyboarding
    1.6lb NRG+ (Indonesia)
    Lightweight fusion foam compressed at 1.6lb offering a light and flexible bodyboard. This foam is 100% waterproof and ideal in mild to cool climates
    CFT Stringer INformation at INverted Bodyboarding Carbon Fibre/ CFTStringer
    Lightweight filament wound carbon composite rod offering rigidity and durability.
    55 45 Rail information at Inverted Bodyboarding
    55/45 Rails
    This rail setup leaves less of your rail in the water and offers the rider less contact with the water and therefore better drive and speed throughout all conditions.
    Trinity Concave Bodyboarding information at Inverted Bodyboarding
    Trinity Concave
    The trinity concave tracks and expels water through four concaves in order to maximise speed. Each concave uses a wide entry and exit point in order to increase water flow and maximise speed, power and control.
    Surlyn plastic bodyboarding information at INverted
    DuPont SurlynSlick
    Surlyn plastic is thin and durable making it the most popular top end slick. Surlyn plastic will bend and stretch before it creases or snaps. This is a must have for intermediate through to advanced riders.
    Wave core PE deck skin on a bodyboard
    Wavecushion 8lb NXLPE(Indo)Decking
    Wavecushion decking is a 8lb decking foam. Much like the PE core, the PE decking is soft and flexible. Unlike the PE core, PE decking is used on all top end boards as for the flex and softness which allows riders to create a foam memory. Despite being soft and flexible PE is still extraordinarily durable.
    WiFly Bodyboard Tail Information at Inverted Bodyboarding
    Wifly Tail
    The Wifly tail uses a smaller release point in order to maximise speed as well as release. Cutting the tail in allows the rider to release the tail easier, whilst the V inlet increases water flow and therefore speed. These boards should be ridden a 0.5” bigger than what you would normally ride.
    Contour Information at Inverted Bodyboarding
    Contours
    The contours are the slight indents in the deck of a bodyboard. Their job is to help you lock in to the board as best as possible.
    Mesh information at Inverted Bodyboarding
    Mesh
    Mesh is a diamond shaped wire like plastic that runs under the slick of a bodyboard. Mesh creates a durable reinforcement between the bodyboards slick and the core making it stiffer, stronger and less likely to crease.
    Nose bulb information at Inverted bodyboarding
    Nose Bulbs
    Nose bulbs are a slightly raised area of foam on the nose of the board which create a comfortable spot to grip the nose.
    CNC Shaping information at Inverted Bodyboarding
    CNC Shaping
    Short for“computernumerical control”, CNC machines allow shapers to cut boards perfectly to the mm. CNC machines offer the sharpest possible finish to bodyboard manufacturing.
    Indonesia bodyboard manufacturing information at Inverted Bodyboarding
    Manufacturing Country: Indonesia/ Broady
    Bodyboards that come from Indonesia come out of Nick Mesritz’s factory. Nick Mesritz is the owner and shaper of both NMD and VS bodyboards and has more than 20 years experience in shaping, testing and creating wavecraft.

Search