FREE SHIPPING ON ALL ORDERS OVER $300*
PLUGGING OPTIONS AVAILABLE AT CHECKOUT
CHECK NEW ARRIVALS
SHOP ACCESSORIES
DONT FORGET YOUR FIN SAVERS
SHOP CATEGORY
CHECK OUT OUR 3 FOR $90 DEAL
SHOP BRANDS
SHOP WETSUIT THICKNESS
BE SURE TO CHECK EACH BRAND SPECIFIC SIZE GUIDE
EXPLORE MORE GIFT IDEAS
SHOP TYPE
LOOKING FOR DURABILITY? CHECK OUT OUR PERFORMANCE BODYBOARD LEASHES
The VS Dave Winchester Torque bodyboard is an ideal intermediate option. A compressed PE core offers the rider who is beginning to paddle out the back and across the wave a good level of durability.
Core - 2.4lb Polyethylene
Stringer - 2 x EXT Stringer
Rails - 55/45 Double Rails
Channels - Graduated
Slick - HDPE
Deck - NXLPE Wavecushion
Tail - Clipped Crescent
Additional Features - Winny Line Contour, CNC Shaped, Mesh, Nose Bulbs
Manufacturing Country - Indonesia
![]() |
2.4lb Polyethylene PE
Mid-heavy-weight extruded foam compressed at 2.4lb offering a sturdy intermediate bodyboard. This foam is not waterproof and is ideal in cold climates.
|
![]() |
2 x EXT Stringer
Pultruded plastic and carbon composite rod offering rigidity and durability.
|
![]() |
55/45
This rail setup leaves less of your rail in the water and offers the rider less contact with the water and therefore better drive and speed throughout all conditions.
|
![]() |
Graduated
Graduated channels are a slow rise channel which redirect waterflow to create lift and allow the rider a better grip on the wave.
|
![]() |
HDPE
HDPE is a high density plastic. This plastic is hard wearing and very stiff. Whilst it will perform as per the norm, it is more prone to creasing when under heavy stress as for its high density properties.
|
![]() |
Wavecushion 8lb NXLPE(Indo)
Wavecushion decking is a 8lb decking foam. Much like the PE core, the PE decking is soft and flexible. Unlike the PE core, PE decking is used on all top end boards as for the flex and softness which allows riders to create a foam memory. Despite being soft and flexible PE is still extraordinarily durable.
|
![]() |
Clipped Crescent
The clipped crescent tail is the most popular crescent tail option. This tail will perform when driving, turning, carving and releasing. Clipping the tail allows the rider to maximise their drive and maintain control through the outer concaves and clipped areas.
|
![]() |
Contours
The contours are the slight indents in the deck of a bodyboard. Their job is to help you lock in to the board as best as possible. |
![]() |
Mesh
Mesh is a diamond shaped wire like plastic that runs under the slick of a bodyboard. Mesh creates a durable reinforcement between the bodyboards slick and the core making it stiffer, stronger and less likely to crease.
|
![]() |
Nose Bulbs
Nose bulbs are a slightly raised area of foam on the nose of the board which create a comfortable spot to grip the nose.
|
![]() |
Manufacturing Country: Indonesia/ Broady Factory
The Broady bodyboard factory started in New Zealand in the 80’s but relocated to Indonesia in the early 2000’s. With two of the industries leading shapers at the helm, the Broady Factory uses CNC shaping, buzztech heat lamination and purpose built Aku Shaping in order to produce high performance bodyboards for most of the world’s leading brands.
|
![]() |
Shaping CNC Shaped |
Performance Bar