Hubboards Jeff Hubbard Pro PP Bat Tail Bodyboard

Season 2022

Size Guide

Bodyboard Size Guide Pop Up

$449.95

Board Performance

Board Technology
Board Dimensions

Core - 1.9lb Polypro
Stringer - 41" & 42" -1 x CFT Stringer
43" - 2 x CFT Stringer
Rails - 50/50 Double Rails
Channels - Slotted Channels
Slick - Surlyn
Deck - Wavecushion Air 8lb PE
Tail - Bat Tail
Additional Features - Deck Contour, MESH, CNC Shaped, XFL Armour and Nose Bulbs.
Manufacturing Country - Indonesia

Understanding this bodyboard's technology

	1.9lbKinetic PP(Indonesia) Lightweight fusion foam compressed at 1.9lb offering instant recoil, enhanced stiffness and compression strength. This foam is 100% waterproof and ideal in mild to warm temperatures.
	Carbon Fibre/ CFTStringer Lightweight filament wound carbon composite rod offering rigidity and durability.
	50/50 Rails This rail setup offers the best of both worlds. A good amount of upper rail in the water allows increased drive, whilst a good amount of lower rail promotes control.
	Slotted Channels Slotted channels are a slender and deeper channel design with less graduation. These channels offer optimum control in bigger and heavier waves.
	DuPont SurlynSlick Surlyn plastic is thin and durable making it the most popular top end slick. Surlyn plastic will bend and stretch before it creases or snaps. This is a must have for intermediate through to advanced riders.
	Wavecushion 8lb NXLPE(Indo)Decking Wavecushion decking is a 8lb decking foam. Much like the PE core, the PE decking is soft and flexible. Unlike the PE core, PE decking is used on all top end boards as for the flex and softness which allows riders to create a foam memory. Despite being soft and flexible PE is still extraordinarily durable.
	Bat Tail Bat tail bodyboards are less curved in their profile, have a much wider finish and employ a‘W’ looking tail. The overall idea of this concept is to provide more surface area to land on, more release through the tail shape and more speed through the emphasised hull. These tails can be a lot harder to control however, as for the limited hull area.
	Contours The contours are the slight indents in the deck of a bodyboard. Their job is to help you lock in to the board as best as possible.
	Mesh Mesh is a diamond shaped wire like plastic that runs under the slick of a bodyboard. Mesh creates a durable reinforcement between the bodyboards slick and the core making it stiffer, stronger and less likely to crease.
	Nose Bulbs Nose bulbs are a slightly raised area of foam on the nose of the board which create a comfortable spot to grip the nose.
	CNC Shaping Short for“computernumerical control”, CNC machines allow shapers to cut boards perfectly to the mm. CNC machines offer the sharpest possible finish to bodyboard manufacturing.
	Manufacturing Country: Indonesia/ Broady The Broady bodyboard factory started in New Zealand in the 80’s but relocated to Indonesia in the early 2000’s. With two of the industries leading shapers at the helm, the Broady Factory uses CNC shaping, buzztech heat lamination and purpose built Aku Shaping in order to produce high performance bodyboards for most of the world’s leading brands.