Free Shipping orders over $300* || XMAS Shipping Cut-off dates, check shipping page!
PLUGGING OPTIONS AVAILABLE AT CHECKOUT
CHECK NEW ARRIVALS
DONT FORGET YOUR FIN SAVERS
CHECK OUT OUR 3 FOR $90 DEAL
SHOP BRANDS
EXPLORE MORE GIFT IDEAS
SHOP TYPE
LOOKING FOR DURABILITY? CHECK OUT OUR PERFORMANCE BODYBOARD LEASHES
The Hubb Edition PP Pro is an incredible high-performance bodyboard that is equipped with a Kinetic Poly Propylene core, single (42") or double CFT stringers (43" and 44") (High-grade filament wound composite-fiber tube for increased board strength and spring-like recoil), mesh, surlyn slick, nose bulbs and a new handhold line contour deck designed to fit comfortably in your hands. This is one of the best options available for any rider who desires to push themselves to the next level.
Board Performance
Core - 1.9lb Polypro
Stringer - 42" 1 x CFT Stringer
43" & 44" 2 x CFT Stringer
Rails - 50/50 Double Rails
Channels - Slotted Channels
Slick - Surlyn
Deck - Wavecushion Air 8lb PE
Tail - Clipped Crescent
Additional Features - Deck Contours MESH, CNC Shaped, XFL Armour and Nose Bulbs.
Manufacturing Country - Indonesia
![]() |
1.9lbKinetic PP(Indonesia)
Lightweight fusion foam compressed at 1.9lb offering instant recoil, enhanced stiffness and compression strength. This foam is 100% waterproof and ideal in mild to warm temperatures.
|
![]() |
Carbon Fibre/ CFTStringer
Lightweight filament wound carbon composite rod offering rigidity and durability.
|
![]() |
50/50 Rails
This rail setup offers the best of both worlds. A good amount of upper rail in the water allows increased drive, whilst a good amount of lower rail promotes control.
|
![]() |
Slotted Channels
Slotted channels are a slender and deeper channel design with less graduation. These channels offer optimum control in bigger and heavier waves.
|
![]() |
DuPont SurlynSlick
Surlyn plastic is thin and durable making it the most popular top end slick. Surlyn plastic will bend and stretch before it creases or snaps. This is a must have for intermediate through to advanced riders.
|
![]() |
Wavecushion 8lb NXLPE(Indo)Decking
Wavecushion decking is a 8lb decking foam. Much like the PE core, the PE decking is soft and flexible. Unlike the PE core, PE decking is used on all top end boards as for the flex and softness which allows riders to create a foam memory. Despite being soft and flexible PE is still extraordinarily durable.
|
![]() |
Clipped Crescent Tail
The clipped crescent tail is the most popular crescent tail option. This tail will perform when driving, turning, carving and releasing. Clipping the tail allows the rider to maximise their drive and maintain control through the outer concaves and clipped areas.
|
![]() |
Mesh
Mesh is a diamond shaped wire like plastic that runs under the slick of a bodyboard. Mesh creates a durable reinforcement between the bodyboards slick and the core making it stiffer, stronger and less likely to crease.
|
![]() |
Contours
The contours are the slight indents in the deck of a bodyboard. Their job is to help you lock into the board as best as possible.
|
![]() |
Nose Bulbs
Nose bulbs are a slightly raised area of foam on the nose of the board which create a comfortable spot to grip the nose.
|
![]() |
CNC Shaping
Short for“computernumerical control”, CNC machines allow shapers to cut boards perfectly to the mm. CNC machines offer the sharpest possible finish to bodyboard manufacturing.
|
![]() |
Manufacturing Country: Indonesia/ Broady
The Broady bodyboard factory started in New Zealand in the 80’s but relocated to Indonesia in the early 2000’s. With two of the industries leading shapers at the helm, the Broady Factory uses CNC shaping, buzztech heat lamination and purpose built Aku Shaping in order to produce high performance bodyboards for most of the world’s leading brands.
|