Science Shred Sled PE Bodyboard

Board Technology
Board Dimensions

Core - 2.4lb Polyethylene
Stringer - 1 x EXT Stringer
Rails - 55/45 Double Rails
Channels - Slotted Channels
Slick - Surlyn
Deck - Wavecushion Air 8lb PE
Tail - Clipped Crescent
Additional Features - CNC Shaped, XFL Armour and Nose Bulbs.
Manufacturing Country - Indonesia

Understanding this bodyboard's technology

	2.4lb Polyethylene PE Mid-heavy-weight extruded foam compressed at 2.4lb offering a sturdy intermediate bodyboard. This foam is not waterproof and is ideal in cold climates.
	EXT Stringer Pultruded plastic and carbon composite rod offering rigidity and durability.
	55/45 Rails This rail setup leaves less of your rail in the water and offers the rider less contact with the water and therefore better drive and speed throughout all conditions.
	Slotted Channels Slotted channels are a slender and deeper channel design with less graduation. These channels offer optimum control in bigger and heavier waves.
	HDPE HDPE is a high density plastic. This plastic is hard wearing and very stiff. Whilst it will perform as per the norm, it is more prone to creasing when under heavy stress as for its high density properties.
	Wavecushion 8lb NXLPE(Indo)Decking Wavecushion decking is a 8lb decking foam. Much like the PE core, the PE decking is soft and flexible. Unlike the PE core, PE decking is used on all top end boards as for the flex and softness which allows riders to create a foam memory. Despite being soft and flexible PE is still extraordinarily durable.
	Clipped Crescent Tail The clipped crescent tail is the most popular crescent tail option. This tail will perform when driving, turning, carving and releasing. Clipping the tail allows the rider to maximise their drive and maintain control through the outer concaves and clipped areas.
	Nose Bulbs Nose bulbs are a slightly raised area of foam on the nose of the board which create a comfortable spot to grip the nose.
	CNC Shaping Short for“computernumerical control”, CNC machines allow shapers to cut boards perfectly to the mm. CNC machines offer the sharpest possible finish to bodyboard manufacturing.
	Manufacturing Country: Indonesia/ Broady Factory The Broady bodyboard factory started in New Zealand in the 80’s but relocated to Indonesia in the early 2000’s. With two of the industries leading shapers at the helm, the Broady Factory uses CNC shaping, buzztech heat lamination and purpose built Aku Shaping in order to produce high performance bodyboards for most of the world’s leading brands.