CHECK NEW ARRIVALS

DONT FORGET YOUR FIN SAVERS

CHECK OUT OUR 3 FOR $90 DEAL

EXPLORE MORE GIFT IDEAS

LOOKING FOR DURABILITY? CHECK OUT OUR PERFORMANCE BODYBOARD LEASHES

ONLY AS STOCKS LAST

Surfmud Surf Baby (Senstive) 125g SPF30 Sunscreen

Size Guide
Body Board Size Guide 2023

Bodyboard Core

Kinetic PP Bodyboard information at Inverted Bodyboarding  
1.9lbKinetic PP(Indonesia)
Lightweight fusion foam compressed at 1.9lb offering instant recoil, enhanced stiffness and compression strength. This foam is 100% waterproof and ideal in mild to warm temperatures.
Taiwan PP information at Inverted Bodyboarding
1.9lb Premium PP(Taiwan) 
Mid-weight extruded foam compressed at 1.9lb offering rigidity for speed and projection. This foam is 100% waterproof and ideal in mild to warm temperatures.
NRG bodyboard information at Inverted Bodyboarding
1.6lb NRG+(Indonesia)
Lightweight fusion foam compressed at 1.6lb offering a light and flexible bodyboard. This foam is 100% waterproof and ideal in mild to cool climates
D12 Bodyboard information at Inverted Bodyboarding
1.2lb D12 PP(Taiwan)
Lightweight extruded foam compressed at 1.2lb offering a light and flexible bodyboard. This foam is 100% waterproof and ideal in all climates.
China PP Information at Inverted Bodyboarding
China PP
Lightweight beaded foam compressed at 1.9lb offering mild rigidity and enhanced buoyancy. This foam is 100% waterproof and ideal in all temperatures.
Pe Bodyboard information at Inverted Bodyboarding
2.4lb PE
Mid-heavy-weight extruded foam compressed at 2.4lb offering a sturdy intermediate bodyboard. This foam is not waterproof and is ideal in cold climates.
EPS Bodyboard information at Inverted Bodyboarding
EPS
Extra lightweight extruded foam offering buoyancy for entry level bodyboarders. This foam is 100% waterproof and ideal in all climates.
High Volume bodyboard information at Inverted Bodyboarding
High Volume
High volume cores have a higher compression of foam and density through them which allows for higher levels of buoyancy. This can in turn transfer into more speed and less flex. 
Proride bodyboard information at Inverted Bodyboarding
ProRide
Mid-weight Kinetic PP with curved mesh T90 beams wedged into the board. This creates elongated bodyboard channels in order to enhance control, rigidity, projection, recoil and speed. This foam is 100% waterproof and ideal in warm climates.
Parabolic bodyboard information at Inverted Bodyboarding
PFST
Mid-weight Kinetic PP with straight mesh T90 beams built into the board. This creates elongated bodyboard channels and enhances rigidity in order to maximise projection, recoil and speed. This foam is 100% waterproof and ideal in warm climates.


Bodyboard Concave

CFT Stringer information at Inverted Bodyboarding  
Carbon Fibre/ CFT Stringer
Lightweight filament wound carbon composite rod offering rigidity and durability.
ISS Stringer information at Inverted Bodyboarding
ISS(Interchangeable Stringer System)
An insert which allows the user to change their stringer and therefore flex dependant on circumstance. All ISS bodyboards come with a base flex stringer. ISS stringers are sold separately. 
EXT Stringer information at Inverted Bodyboarding
EXT Stringer
Pultruded plastic and carbon composite rod offering rigidity and durability.
PRS stringer information at Inverted Bodyboarding
PRS Stringer
Tapered carbon fibre stringer which is wider and stiffer at the tail of the bodyboard then narrower and more flexible at the nose of the bodyboard. Designed to maximise projection.
Staggered Stringer information at Inverted Bodyboarding
Staggered Stringers
Staggered stringers are smaller than central stringers and work to reinforce the bodyboard and its core.


Bodyboard Rails

60/40 Rail information at Inverted Bodyboarding  60/40 Rails
This rail setup allows more of your board to connect with the water and offers the rider more control in heavier and bigger waves.
55/45 Rail information at INverted Bodyboarding
55/45 Rails
This rail setup leaves less of your rail in the water and offers the rider less contact with the water and therefore better drive and speed throughout all conditions.
50/50 Rail information at Inverted Bodyboarding
50/50 Rails
This rail setup offers the best of both worlds. A good amount of upper rail in the water allows increased drive, whilst a good amount of lower rail promotes control.
Vax Trax rail information at Inverted Bodyboarding
Vax Trax Rails
Vax Trax is a Stealth initiative. These rails have a small inlet in the rail at the tail end of the board. The idea is to redirect waterflow in order to maintain control over the rail of your bodyboard.

 

Bodyboard Channels

 
Graduated Channel Information at Inverted Bodyboarding
Graduated Channels
Graduated channels are a slow rise channel which redirect waterflow to create lift and allow the rider a better grip on the wave. 
Slotted Channels information at Inverted Bodyboarding
Slotted Channels
Slotted channels are a slender and deeper channel design with less graduation. These channels offer optimum control in bigger and heavier waves. 
No Channel bodyboard information at Inverted Bodyboarding
No Channels
No concave means no resistance and no resistance means more speed. No concave can however make things slightly harder to control and means you will have to rely on your bottom turning that little bit more. 
Quad Concave information at Inverted Bodyboarding
Quad Concave
The quad concave tracks and expels water through four concaves in order to maximise speed. Trimming, bottom turning or driving, the quad concave aims to draw water and promote powerful lines.
Trinity Concave information at Inverted Bodyboarding
Trinity Concave
The trinity concave tracks and expels water through four concaves in order to maximise speed. Each concave uses a wide entry and exit point in order to increase water flow and maximise speed, power and control.
Single to Double Concave information at Inverted Bodyboarding
Single to Double Concave
The single to double concave tracks water early with a high single concave that flushes out into a quad concave bottom. Catching the water early and redirecting out to the final four concaves maximises the riders power and speed.
Quad Exhaust bodyboard information at Inverted Bodyboarding
QuadExhaust Channels
The quad exhaust uses two outer channels in the space of one. The two outer channels redirect water flow in order to maximise speed in the power pockets of the wave. The central raised area allows the user to maximise drive.
Double Concave Information at Inverted Bodyboarding
Double Concave
The double concave bodyboard has a small raised line through the middle the bodyboard toward the tail end which pushes water away from the centre of the board and allows the rider a level of control. The double concave is almost a flat bottom and is popular for Drop Knee riders as for its loose characteristics.
Quad Vent Channel information at Inverted Bodyboarding
QuadVent Channels
The quad vent uses two outer channels in the space of one. The two outer channels redirect water flow in order to maximise speed in the power pockets of the wave. The central raised area allows the user to maximise drive.
Slot Hull channel information at Inverted Bodyboarding
Slot Hull
The Slot Hull is a Stealth initiative which emphasises planing. The large single hull concave allows the rider to move across the wave with less traction and create higher levels of down the line speed. 


Bodyboard Slick

Mesh information at Inverted Bodyboarding
Mesh
Mesh is a diamond shaped wire like plastic that runs under the slick of a bodyboard.  Mesh creates a durable reinforcement between the bodyboards slick and the core making it stiffer, stronger and less likely to crease. 
HDPE bodyboard information at Inverted Bodyboarding  
HDPE Slick
HDPE is a high density plastic. This plastic is hard wearing and very stiff. Whilst it will perform as per the norm, it is more prone to creasing when under heavy stress as for its high density properties.
Surlyn Plastic information at Inverted Bodyboarding
DuPont Surlyn Slick
Surlyn plastic is thin and durable making it the most popular top end slick. Surlyn plastic will bend and stretch before it creases or snaps. This is a must have for intermediate through to advanced riders.


Bodyboard Deck Skins

Wavecushion NXLPE decking information at Inverted Bodyboarding
Wavecushion 8lb NXLPE(Indo) Decking
Wavecushion decking is a 8lb decking foam. Much like the PE core, the PE decking is soft and flexible. Unlike the PE core,  PE decking is used on all top end boards as for the flex and softness which allows riders to create a foam memory. Despite being soft and flexible PE is still extraordinarily durable. 
Cellucushion Taiwan PE decking information at Inverted Bodyboarding
Cellu-Cushion 8lb PE(Taiwan) Decking
Cellu-Cushion is a 8lb decking foam. It offers strength and ensures you get a longer lasting board. The design allows your body to lock with your board when riding, ensuring the board is comfortable to ride and hold.
Skintec Decking information at Inverted Bodyboarding
Skintec Underlay
Skintec is a second layer of decking made of polypropylene fused with mesh. This deck type softens any big impacts your board might take and is used to maximise your bodyboards durability. 
Tension Tech bodyboard information at Inverted Bodyboarding
Tension Tech Underlay
Tension tech is a second layer of decking made of polypropylene fused with mesh. This deck type softens any big impacts your board might take and is used to maximise your bodyboards durability. 
IXL Crosslink Decking information at Inverted Bodyboarding  IXLPECrosslink Decking
IXLPE is physically crosslinked polyethylene foam and is a very smooth skin decking. Soft in appearance and feeling.


Bodyboard Tails

Crescent Tail information at Inverted bodyboarding
Full Crescent Tail
The full crescent tail is the most control oriented bodyboard tail. This tail will perform when turning and carving. Using the full length of the crescent allows maximum mobility and water flow. 
Clipped Crescent Tail information at Inverted Bodyboarding
Clipped Crescent Tail
The clipped crescent tail is the most popular crescent tail option.  This tail will perform when driving, turning, carving and releasing. Clipping the tail allows the rider to maximise their drive and maintain control through the outer concaves and clipped areas.
Bat Tail information at Inverted Bodyboarding
Bat Tail
Bat tail bodyboards are less curved in their profile, have a much wider finish and employ a‘W’ looking tail. The overall idea of this concept is to provide more surface area to land on, more release through the tail shape and more speed through the emphasised hull. These tails can be a lot harder to control however, as for the limited hull area.
Two Piece Tail information at Inverted Bodyboarding
Two-Piece Tail
The tail piece is a separate piece of decking that goes on the crescent tail. Done for aesthetic purposes only and as oppose to rolling the deck all the way down over the tail.
Wifly Tail information at Inverted Bodyboarding
Wifly Tail
The Wifly tail uses a smaller release point in order to maximise speed as well as release. Cutting the tail in allows the rider to release the tail easier, whilst the V inlet increases water flow and therefore speed. These boards should be ridden a 0.5” bigger than what you would normally ride.
V Tail information at Inverted Bodyboarding  V-Tail
The V Tail catches water on a sharper angle and maximises rider control and stability. The V Tail performs exceptionally well when bottom turning and carving. 
Tri Crescent tail information at Inverted Bodyboarding
Tri-Crescent
The tri-crescent is a clipped crescent tail with small complimenting compressions were the tri-quad meets the tri-crescent. The tri-crescent works to further engage the tri-quad and maximise speed and control. 
Delta Bat Tail information at Inverted Bodyboarding
Delta Bat
The delta bat tail bodyboards are less curved in their profile, have a much wider finish and employ a‘W’ looking tail. The overall idea of this concept is to provide more surface area to land on, more release through the tail shape and more speed through the emphasised hull. These tails can be a lot harder to control however, as for the limited hull area. The delta bat specifically is much sharper in its bat tail appearance.
Chisel Tail information at Inverted Bodyboarding
Chisel Tail
The Chisel Tail allows the rider more grip to the wave through its straight profile. This cut emphasises the tails grab and works to hold the rider in place in waves of consequence.

 

Additional Bodyboard Features

CNC Shaping information at Inverted Bodyboarding
CNC Shaping
Short for“computer numerical control”, CNC machines allow shapers to cut boards perfectly to the mm. CNC machines offer the sharpest possible finish to bodyboard manufacturing.
Nose Bulb information at Inverted Bodyboard
Nose Bulbs
Nose bulbs are a slightly raised area of foam on the nose of the board which create a comfortable spot to grip the nose. 
Contour information at Inverted Bodyboarding
Contours
The contours are the slight indents in the deck of a bodyboard. Their job is to help you lock in to the board as best as possible. 
XFL information at Inverted Bodyboarding Information
XFL Armour
XFL armour are additional layers of crosslink foams normally attached to the nose or tail of your bodyboard in order to increase its strength.
Nose and Tail Buffers  Nose & Tail Buffers
Nose andTail Buffers are additional layers of crosslink foams attached under the decking of your bodyboard in order to increase its strength.

 

Manufacturing Country/ Factory

Broady Indonesia bodyboarding manufacturing information at Inverted Bodyboarding  Indonesia/ Broady Factory
Bodyboards that come from Indonesia come out of Nick Mesritz’s factory. Nick Mesritz has more than 20 years experience in shaping, testing and creating wave crafts.
Taiwan Bodyboard manufacturing at Inverted Bodyboarding
Manufacturing Country: Taiwan/ Agit Factory
Bodyboards that come out of Taiwan and the Agit Factory are used by top bodyboarding professionals around the world. The Taiwan/ Agit Factory is most renowned for its work with Funkshen and Nomad bodyboards.
China Bodyboard Manufacturing information at  Inverted Bodyboarding
Manufacturing Country: China
Most, if not all, entry level bodyboards come out of China. Mass produced for Summer, these bodyboards are made for beginner level bodyboarding in the shore.
Created for the little people on this earth. Naturally better, this toxin free protection for the most precious and sensitive skin protects little people both in and out of the water.

SPF30 Sunscreen
4 Hrs Water Resistant
Sweat Resistant
Natural Ingredients
Reef Safe
Recyclable Packaging
Australian Made

Search