Season 2025

VS Dave Winchester Splitter Channel PP Bodyboard

$529.95 AUD

Introducing the SPLTR — a next - generation channel system engineered for precision flow and unmatched control. The SPLTR features a wider entry channel that starts higher on the board than a traditional design, transitioning into a refined double channel through the tail. This unique configuration creates a dynamic water - flow pattern that locks the rail edge for amplified projection where it counts most.

HURRY! ONLY LEFT IN STOCK.

Size: 42"

42"
43"

Colour: Sea Green Deck/ Mallard Slick

Sea Green Deck/ Mallard Slick
Royal Blue Deck/ Coral Slick
More payment options

Guarantee safe & secure checkout

afterpayamerican expressapple paygoogle paymasterpaypalshopify payvisa
Delivery & ReturnAsk a Question
Features

Bodyboard Features;
Inner Core - 1.9lb Polypro
Stringer - 1 x CFT Stringer
Rails - 55/45 Double Rails
Channels - MiniQuad Concave
Slick - Dupont® Surlyn™
Deck - WaveCushion 8lb PE Deck Skin with NEW Q12 backing
Tail - Clipped Crescent
Additional Features - MESH, CNC Shaped, XFL Inner Rails, Nose & Tail Guards, Bull Grip Nose Bulbs.
Manufacturing Country - Indonesia

Understanding this bodyboard's technology

Kinetic Bodyboard information at Inverted Bodyboarding
1.9lb Kinetic PP (Indonesia)
Lightweight fusion foam compressed at 1.9lb offering instant recoil, enhanced stiffness and compression strength. This foam is 100% waterproof and ideal in mild to warm temperatures.
CFT Stringer INformation at INverted Bodyboarding
Carbon Fibre/ CFT Stringer
Lightweight filament wound carbon composite rod offering rigidity and durability.
55 45 Rail information at Inverted Bodyboarding
55/45 Rails
This rail setup leaves less of your rail in the water and offers the rider less contact with the water and therefore better drive and speed throughout all conditions.
MiniQuad Concave
The X4 MiniQuad takes the key design factors of our groundbreaking full-length QuadConcave and shrinks it down, focusing on the back half of the board. Starting below the wide-point, the X4 essentially splits the hull in two, combining the glide and flow of a flat bottom with the drive and directional control of the QuadConcave.  The X4 MiniQuad is designed to excel in small to medium size surf and for quicker transitions closer to the pocket of the wave.
Surlyn plastic bodyboarding information at INverted
DuPont Surlyn Slick
Surlyn plastic is thin and durable making it the most popular top end slick. Surlyn plastic will bend and stretch before it creases or snaps. This is a must have for intermediate through to advanced riders.
Wave core PE deck skin on a bodyboard
Wavecushion 8lb NXLPE (Indo) Decking
Wavecushion decking is a 8lb decking foam. Much like the PE core, the PE decking is soft and flexible. Unlike the PE core, PE decking is used on all top end boards as for the flex and softness which allows riders to create a foam memory. Despite being soft and flexible PE is still extraordinarily durable.
Q12 Q12 Backing
 Higher density crosslinked PP foam backing layer delivers more resilient nose and tail seam fusion and increases board strength.
Clipped Crescent Tail information at Inverted bodyboarding
Clipped Crescent Tail
The clipped crescent tail is the most popular crescent tail option.  This tail will perform when driving, turning, carving and releasing. Clipping the tail allows the rider to maximise their drive and maintain control through the outer concaves and clipped areas.
Mesh information at Inverted Bodyboarding
Mesh
Mesh is a diamond shaped wire like plastic that runs under the slick of a bodyboard. Mesh creates a durable reinforcement between the bodyboards slick and the core making it stiffer, stronger and less likely to crease.
Nose bulb information at Inverted bodyboarding
Nose Bulbs
Nose bulbs are a slightly raised area of foam on the nose of the board which create a comfortable spot to grip the nose.
CNC Shaping information at Inverted Bodyboarding
CNC Shaping
Short for “computer numerical control”, CNC machines allow shapers to cut boards perfectly to the mm. CNC machines offer the sharpest possible finish to bodyboard manufacturing.
Indonesia bodyboard manufacturing information at Inverted Bodyboarding
Manufacturing Country: Indonesia/ Broady
The Broady bodyboard factory started in New Zealand in the 80’s but relocated to Indonesia in the early 2000’s. With two of the industries leading shapers at the helm, the Broady Factory uses CNC shaping, buzztech heat lamination and purpose built Aku Shaping in order to produce high performance bodyboards for most of the world’s leading brands.
Dimensions

Bodyboard Size

Nose

Wide Point

NTWP

Tail

Finished Thickness

41"

 11 7/8" 20 5/8" 18 3/4" 17 1/2" 52mm

41.5"

 12 20 7/8" 19" 17 3/4" 52mm

42"

 12 1/8" 21 1/8" 19 1/4" 17 7/8" 53mm

42.5"

 12 1/4" 21 3/8" 19 1/2" 18 1/8" 54mm

43"

 12 3/8" 21 5/8" 19 3/4" 18 3/8" 55mm
Reviews