CHECK NEW ARRIVALS

DONT FORGET YOUR FIN SAVERS

CHECK OUT OUR 3 FOR $90 DEAL

EXPLORE MORE GIFT IDEAS

LOOKING FOR DURABILITY? CHECK OUT OUR PERFORMANCE BODYBOARD LEASHES

ONLY AS STOCKS LAST

Morey Mach 7-X PP Bodyboard

Season 2023
Size Guide
Bodyboard Size Guide Pop Up

Experience total control and agility with the Morey Mach 7-X PP bodyboard! With a classic look and new school technology, this board mixes the best of both worlds for a high-performance ride.

Board Performance

PP Surlyn bodyboard performance bar
Select Size:
Bodyboard Size Guide Pop Up
Select Colour:
Black Deck/ Orange Slick
Yellow Deck/ Orange Slick
Select Plug Options:

  • Core - 1.9lb Polypro
    Stringer - 1 x CFT Stringer
    Rails - 55/45 Double Rails
    Channels - Graduated Channels
    Slick - Dupont® Surlyn™
    Deck - WaveCushion 8lb PE Deck Skin 
    Additional Features - MESH, CNC Shaped, XFL Nose and Tail Bumper.
    Manufacturing Country - Indonesia

    Understanding this bodyboard's technology

    Kinetic Bodyboard information at Inverted Bodyboarding
    1.9lbKinetic PP(Indonesia)
    Lightweight fusion foam compressed at 1.9lb offering instant recoil, enhanced stiffness and compression strength. This foam is 100% waterproof and ideal in mild to warm temperatures.
    CFT Stringer INformation at INverted Bodyboarding Carbon Fibre/ CFTStringer
    Lightweight filament wound carbon composite rod offering rigidity and durability.
    55 45 Rail information at Inverted Bodyboarding
    55/45 Rails
    This rail setup leaves less of your rail in the water and offers the rider less contact with the water and therefore better drive and speed throughout all conditions.
    Graduated Channels at Inverted Bodyboarding
    Graduated
    Graduated channels are a slow rise channel which redirect waterflow to create lift and allow the rider a better grip on the wave. 
    Surlyn plastic bodyboarding information at INverted
    DuPont SurlynSlick
    Surlyn plastic is thin and durable making it the most popular top end slick. Surlyn plastic will bend and stretch before it creases or snaps. This is a must have for intermediate through to advanced riders.
    Wave core PE deck skin on a bodyboard
    Wavecushion 8lb NXLPE(Indo)Decking
    Wavecushion decking is a 8lb decking foam. Much like the PE core, the PE decking is soft and flexible. Unlike the PE core, PE decking is used on all top end boards as for the flex and softness which allows riders to create a foam memory. Despite being soft and flexible PE is still extraordinarily durable.
    Q12 Q12 – Higher density crosslinked PP foam backing layer delivers more resilient nose and tail seam fusion and increases board strength.
    Clipped Crescent Tail Information at Inverted Bodyboarding
    Clipped Crescent Tail
    The clipped crescent tail is the most popular crescent tail option.  This tail will perform when driving, turning, carving and releasing. Clipping the tail allows the rider to maximise their drive and maintain control through the outer concaves and clipped areas.
    Tail Piece
    Mesh information at Inverted Bodyboarding
    Mesh
    Mesh is a diamond shaped wire like plastic that runs under the slick of a bodyboard. Mesh creates a durable reinforcement between the bodyboards slick and the core making it stiffer, stronger and less likely to crease.
    Nose bulb information at Inverted bodyboarding
    Nose Bulbs
    Nose bulbs are a slightly raised area of foam on the nose of the board which create a comfortable spot to grip the nose.
    CNC Shaping information at Inverted Bodyboarding
    CNC Shaping
    Short for“computernumerical control”, CNC machines allow shapers to cut boards perfectly to the mm. CNC machines offer the sharpest possible finish to bodyboard manufacturing.
    Indonesia bodyboard manufacturing information at Inverted Bodyboarding
    Manufacturing Country: Indonesia/ Broady
    The Broady bodyboard factory started in New Zealand in the 80’s but relocated to Indonesia in the early 2000’s. With two of the industries leading shapers at the helm, the Broady Factory uses CNC shaping, buzztech heat lamination and purpose built Aku Shaping in order to produce high performance bodyboards for most of the world’s leading brands.

Search