Stealth Slasher SS Vax Trax PP Bodyboard

Stealth Slasher SS Vax Trax PP Bodyboard

Season 2021

Size Guide

Bodyboard Size Guide

$285.47

The Stealth Slasher is reinforced by three stringers and the vax trax system. This board is the ultimate key to durability and control.

Board Performance

Select Size:

Bodyboard Size Guide

42

43

Select Colour:

Select Plug Options:

Board Technology
Board Dimensions

Core - 1.9lb Polypro
Stringer - 3 CFT Stringer (1 x full length & 2 x half length)
Rails - 55/45 Double Rails with Top Chine & Vax Trax system
Channels - AKU Shaped Double Concave Hull
Slick - Surlyn
Deck - Wavecushion Air 8lb PE
Tail - Full Crescent with Tail Piece
Additional Features - CNC Shaped, XFL Armour.
Manufacturing Country - Indonesia

Understanding this bodyboard's technology

	1.9lbKinetic PP(Indonesia) Lightweight fusion foam compressed at 1.9lb offering instant recoil, enhanced stiffness, and compression strength. This foam is 100% waterproof and ideal in mild to warm temperatures.
	Carbon Fibre/ CFTStringer Lightweight filament wound carbon composite rod offering rigidity and durability.
	55/45 Rails This rail setup leaves less of your rail in the water and offers the rider less contact with the water and therefore better drive and speed throughout all conditions.
	Slotted Channels Slotted channels are a slender and deeper channel design with less graduation. These channels offer optimum control in bigger and heavier waves.
	DuPont SurlynSlick Surlyn plastic is thin and durable making it the most popular top end slick. Surlyn plastic will bend and stretch before it creases or snaps. This is a must have for intermediate through to advanced riders.
	Wavecushion 8lb NXLPE(Indo)Decking Wavecushion decking is a 8lb decking foam. Much like the PE core, the PE decking is soft and flexible. Unlike the PE core, PE decking is used on all top end boards as for the flex and softness which allows riders to create a foam memory. Despite being soft and flexible PE is still extraordinarily durable.
	Clipped Crescent Tail The clipped crescent tail is the most popular crescent tail option. This tail will perform when driving, turning, carving and releasing. Clipping the tail allows the rider to maximise their drive and maintain control through the outer concaves and clipped areas.
	Mesh Mesh is a diamond shaped wire like plastic that runs under the slick of a bodyboard. Mesh creates a durable reinforcement between the bodyboards slick and the core making it stiffer, stronger and less likely to crease.
	Nose Bulbs Nose bulbs are a slightly raised area of foam on the nose of the board which create a comfortable spot to grip the nose.
	CNC Shaping Short for“computernumerical control”, CNC machines allow shapers to cut boards perfectly to the mm. CNC machines offer the sharpest possible finish to bodyboard manufacturing.
	Manufacturing Country: Indonesia/ Broady Bodyboards that come from Indonesia come out of Nick Mesritz’s factory. Nick Mesritz is the owner and shaper of both NMD and VS bodyboards and has more than 20 years experience in shaping, testing and creating wavecraft.