CHECK NEW ARRIVALS

DONT FORGET YOUR FIN SAVERS

CHECK OUT OUR 3 FOR $90 DEAL

EXPLORE MORE GIFT IDEAS

LOOKING FOR DURABILITY? CHECK OUT OUR PERFORMANCE BODYBOARD LEASHES

ONLY AS STOCKS LAST

VS Dave Winchester Alphaflex PFST PP WIFLY Quad Concave Bodyboard

Season 2024
Size Guide
Bodyboard Size Guide Pop Up
Mez has spent 30+ years perfecting his craft and redefining high-performance bodyboard construction. With AlphaFlex, VS unveils their next core evolution. Boasting the revolutionary Kinetic Ultra 1.9lb PP core and exclusive PFS-T tech, AlphaFlex needs no traditional stringer for remarkable torsional flex. This board's remarkable rides delivers powerful projection and fantastic speed on hard carves--perfect for experienced riders who grasp the nuances of flex.

Board Performance

Quad WiFly PP Parabolic performance bar

Select Size:
Bodyboard Size Guide Pop Up
Select Colour:
Midnight Blue Deck/ White Slick
Tangerine Deck/ Grey Slick
Midnight Blue Deck/ Tangerine Slick
Select Plug Options:

  • Core - Parallel Flex System (PFS-T) 1.9lb Polypro
    Stringer - n/a
    Rails - 55/45 Double Rails
    Channels - Quad Concave
    Slick - Surlyn
    Deck - Wavecushion Air 8lb PE
    Tail - WiFly V2
    Additional Features - MESH, CNC Shaped, XFL Armour and Nose Bulbs, Plastic Imprint Logo
    Manufacturing Country - Indonesia

    *Please note, all WiFly tail bodyboards should be ridden a 0.5" bigger than normal.

    Understanding this bodyboard's technology

    PFST or Parabolic bodyboard information at Inverted Bodyboarding
    PFST
    Mid-weight Kinetic PP with straight mesh T90 beams built into the board. This creates elongated bodyboard channels and enhances rigidity in order to maximise projection, recoil and speed. This foam is 100% waterproof and ideal in warm climates.
    Kinetic Bodyboard information at Inverted Bodyboarding
    1.9lbKinetic PP(Indonesia)
    Lightweight fusion foam compressed at 1.9lb offering instant recoil, enhanced stiffness and compression strength. This foam is 100% waterproof and ideal in mild to warm temperatures.
    55 45 Rail information at Inverted Bodyboarding
    55/45 Rails
    This rail setup leaves less of your rail in the water and offers the rider less contact with the water and therefore better drive and speed throughout all conditions.

    Quad Concave

    A revolution in bodyboard design, the fluid dynamic configuration of the Quad Concave delivers unrivalled response through the tube and electric board speed down the line.


    Surlyn plastic bodyboarding information at INverted
    DuPont SurlynSlick
    Surlyn plastic is thin and durable making it the most popular top end slick. Surlyn plastic will bend and stretch before it creases or snaps. This is a must have for intermediate through to advanced riders.
    Wave core PE deck skin on a bodyboard
    Wavecushion 8lb NXLPE(Indo)Decking
    Wavecushion decking is a 8lb decking foam. Much like the PE core, the PE decking is soft and flexible. Unlike the PE core, PE decking is used on all top end boards as for the flex and softness which allows riders to create a foam memory. Despite being soft and flexible PE is still extraordinarily durable.
    WiFly Bodyboard Tail Information at Inverted Bodyboarding
    Wifly Tail
    The Wifly tail uses a smaller release point in order to maximise speed as well as release. Cutting the tail in allows the rider to release the tail easier, whilst the V inlet increases water flow and therefore speed. These boards should be ridden a 0.5” bigger than what you would normally ride.
    Mesh information at Inverted Bodyboarding
    Mesh
    Mesh is a diamond shaped wire like plastic that runs under the slick of a bodyboard. Mesh creates a durable reinforcement between the bodyboards slick and the core making it stiffer, stronger and less likely to crease.
    Nose bulb information at Inverted bodyboarding
    Nose Bulbs
    Nose bulbs are a slightly raised area of foam on the nose of the board which create a comfortable spot to grip the nose.
    GripTech
    GripTech
    Thermoformed textured grips promote superior wax build up for enhanced hand traction.
    CNC Shaping information at Inverted Bodyboarding
    CNC Shaping
    Short for“computernumerical control”, CNC machines allow shapers to cut boards perfectly to the mm. CNC machines offer the sharpest possible finish to bodyboard manufacturing.
    Indonesia bodyboard manufacturing information at Inverted Bodyboarding
    Manufacturing Country: Indonesia/ Broady
    The Broady bodyboard factory started in New Zealand in the 80’s but relocated to Indonesia in the early 2000’s. With two of the industries leading shapers at the helm, the Broady Factory uses CNC shaping, buzztech heat lamination and purpose built Aku Shaping in order to produce high performance bodyboards for most of the world’s leading brands.

Search